Please select the correct address for shipping before you submit your order because, for this batch, the shipping address cannot be changed after the order has been submitted.
Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter.
You will need an ATX PSU with at least 10 six-pin PCIe connectors. There are 3 six-pin PCIe connectors on each hashing board and all three need to be connected to the PSU for the hashing board to operate. Do not connect more than one PSU to the same hashing board. Bitmain recommends the APW3++ to power the T9+.
Separate power supply to control board: there is one additional six-pin PCIe connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner only after all the 10 PCIe connectors are connected to a power supply.
220VAC Power @25℃ ,93%
conversion efficiency of APW3
1432 W +7%
220VAC Power efficiency @25℃,93% conversion efficiency of APW3
Networking connection mode
Power connection mode
All three PCI-E ports are required to power the board. You can use one PSU to power multiple boards, but do not attempt to power one board with two PSUs.We suggest to prevent the control board to be powered up before hash boards be powered up.